We look at the damage, explain what it needs and give you a written price before we start.
Every technician is IICRC certified and has handled ceiling water damage repair many times. You get a clear plan before any work starts.
Filing a claim is easier with good records. We document everything and talk to your adjuster for you.
Most people who call us have never dealt with ceiling water damage repair before. We walk you through it on the phone, then send a local crew with the right equipment.
When a brown circle finally appears above you, the leak has been at work for a while. Before any mark shows, water has traveled down a joist, saturated the insulation and collected on top of the drywall. It could come from an upstairs bathroom, plumbing inside the ceiling, an AC condensate line or the roof. Nothing is repaired until the origin of the water has been tracked down.
A coat of paint over the spot solves nothing. Moisture left in the cavity brings the discoloration back and lets mold get going on the paper side in 24 to 48 hours. The opening is kept as small as the damage allows, wet insulation comes out, joists and surrounding drywall are dried, and the area is patched, textured and painted to blend. If the ceiling has started to droop, treat it differently. Keep clear of that area and phone us.
The top side of the drywall and the insulation resting on it stay wet long after the surface feels dry, which is where mold tends to grow unseen.
The damp area usually includes fan mounts, recessed fixtures and wiring boxes. Water in a fixture can short the circuit, so switch off the breaker for that room.
The structure on the upper side, attic boards or the floor of the next story, tends to be wet too. We check that level as well, because drying only the ceiling leaves moisture behind.
Some older popcorn textures and plasters contain asbestos. Testing comes first in such a home, ahead of any cutting, scraping or demolition of the damaged section.
The first job is locating the starting point, which involves meter readings, a thermal camera and a look at whatever is over the ceiling. Until the water stops coming, fixing the ceiling would not last.
Power to wet fixtures is shut off and furniture below is covered or moved. Where water is trapped overhead, it gets drained under control into containers.
Damaged drywall and wet insulation come out. Drying equipment, meaning a dehumidifier and air movers, works on the framing and adjacent drywall, with antimicrobial treatment for water that was not clean.
When everything reads dry, our crew replaces the insulation, hangs drywall, finishes the seams, blends the texture with the rest of the ceiling, then applies stain blocker and paint.
We save what can be dried properly and remove only what cannot. Moisture readings make that call, not guesswork.
Call (586) 231-9894| Material | Can usually be saved when | Has to be replaced when |
|---|---|---|
| Ceiling drywall | Flat, firm panels with a light stain from clean water | Sagging, soft, crumbling or moldy panels, or any contaminated water |
| Ceiling paint and texture | Texture still firmly attached, with staining that primer can seal | Loose, peeling or bubbled finish over the wet area |
| Crown molding and trim | Solid wood trim that dries straight with tight joints | Swollen composite molding and pieces pulling off the wall |
| Light fixtures | Dry fixtures that test safe electrically | Any fixture or box that filled with water |
| Ceiling joists | Nearly always, because sound framing handles brief wetting | Rarely, limited to wood decayed by long running leaks |
Moisture follows the joists and the insulation drinks it in. Because the panel soaks from its top side, nothing may look wrong from underneath.
You see the first ring, along with blisters in the paint. Soaked insulation weighs on the drywall while mold can start on its paper face.
Drywall softens and pulls away from its screws. Between the joists the surface dips, joints split apart and a musty smell arrives below.
Parts of the ceiling can come down along with the wet insulation resting on them. The repair zone is far bigger at this stage, with mold well rooted inside the cavity.
Have a different question? Call us and we will answer it over the phone.
Call (586) 231-9894Take action now and prevent costly damage. Bozeman Restoration is ready to help.
Call (586) 231-9894 Now